Sewage Treatment Three Lobe Roots Air Blower

• Customization: Available
• After-sales Service: Yes
• Warranty: 1 Year
• Model NO.: SL
• Type: Sewage Treatment Equipment
• Usage: Industrial, Agriculture, Hospital, Waste Water Treatment
• Material: Casting Iron Ht200
• Application: Sewage and Waste Water Treatment
• Advantage: High Quality, Low Noise, Energy Saving
• Installation Way: Horizontal Type. Vertical Type
• Maintenance: Good After -Service
• Certification: ISO 9001 CE Eac
• Customized Support: OEM, ODM, Obm
• Transport Package: Export Wooden Case
• Specification: Standard and Customized models
• Trademark: JSMY
• Origin: China
• HS Code: 8414599010
• Production Capacity: 10000 Sets/Year

Product Description

Product Description
1)The Roots blower is a volumetric fan.
2)The air flow is proportional to the speed. The three-lobe impeller rotates each time, and two impellers breathe and exhaust for three times
Compared with the two-lobe type, the gas pulsation is less, the load changes is smaller, the mechanical strength is stronger, the noise is low, and the vibration is small
3)  There are 2pcs three-lobe impellers on the two parallel shafts. The slight gap is between the impellers and the inner surface of the elliptical tank and each impeller.
The impeller rotates at a constant speed in the opposite direction. A certain amount of gas surrounded by the tank and the impellers is transported from suction side to exhaust side
 4)  Each impeller and synchronizing gear always keep the correct phase position, mutual contact does not be happened , so it can be speeded up without  internal lubrication, it is simple , stable operation and performance, it adapts to various purposes and uses in a wide range of fields.

Three lobe impellers working principle


Main structure

Main features:

• Driven by helical synchronous gears: Balanced transmission, low noise
• Adopting the advanced impeller curve in the world: increasing the Volume ratio, high efficiency
• All bearings are imported from NSK or SKF bearing, it has good loading performance and long lifetime.
• The oil seal is used CR seal imported from USA.
• Cooling way is air-cooled and water-cooled
• The impeller uses the impeller & shaft integrated structure. It avoids the defects of the impeller shaft split structure.
• Compact structure, the same inlet and outlet impeller structure, flexible installation
• There are various installation ways. The air blower can be installed into horizontal air inlet and vertical air inlet using the same bottom
• It can also change the position of the drive shaft, right or left shaft drive, upper shaft or lower shaft drive
• Double oil tank structure, splash lubrication is used on the gear end and the drive end, which improves the better heat dissipation, and also improves the better lubrication effect of the bearing and gear
•  
• Specifications

       

model	Exhaust Port  Dia (MM)	Speed	Different pressure for different Inlet air flow (M^3/min) & shaft power (kw)
			0.1kgf/cm^2		0.2kgf/cm^2		0.3kgf/cm^2		0.4kgf/cm^2		0.5kgf/cm^2		0.6kgf/cm^2		0.7kgf/cm^2		0.8kgf/cm^2
		RPM	1000mmH20		2000mmH20		3000mmH20		4000mmH20		5000mmH20		6000mmH20		7000mmH20		8000mmH20
			0.01Mpa		0.02Mpa		0.03Mpa		0.04Mpa		0.05Mpa		0.06Mpa		0.07Mpa		0.08Mpa
			M^3/min	KW	M^3/min	kW	M^3/min	KW	M^3/min	KW	M^3/min	KW	M^3/min	KW	M^3/min	KW	M^3/min	KW
SL 4005	DN50 (2")	850	1.02	0.42	0.89	0.64	0.79	0.85	0.71	1.07	0.63	1.29
		950	1.18	0.47	1.05	0.71	0.95	0.95	0.86	1.20	0.79	1.44
		1050	1.33	0.52	1.20	0.79	1.10	1.06	1.02	1.32	0.94	1.59
		1150	1.49	0.57	1.36	0.86	1.26	1.16	1.18	1.45	1.10	1.74
		1250	1.65	0.62	1.52	0.94	1.42	1.26	1.33	1.58	1.26	1.90	1.19	2.22	1.13	2.54	1.07	2.86
		1350	1.80	0.67	1.67	1.01	1.57	1.36	1.49	1.70	1.42	2.05	1.35	2.39	1.29	2.74	1.23	3.08
		1450	1.96	0.71	1.83	1.09	1.73	1.46	1.65	1.83	1.57	2.20	1.50	2.57	1.44	2.94	1.39	3.31
		1550	2.12	0.76	1.99	1.16	1.89	1.56	1.80	1.95	1.73	2.35	1.66	2.75	1.60	3.15	1.54	3.54
		1650	2.27	0.81	2.14	1.24	2.04	1.66	1.96	2.08	1.89	2.50	1.82	2.93	1.76	3.35	1.70	3.77
		1750	2.43	0.86	2.30	1.31	2.20	1.76	2.12	2.21	2.04	2.65	1.98	3.10	1.91	3.55	1.86	4.00
		1850	2.59	0.91	2.46	1.39	2.36	1.86	2.27	2.33	2.20	2.81	2.13	3.28	2.07	3.75	2.01	4.23
		1950	2.74	0.96	2.61	1.46	2.51	1.96	2.43	2.46	2.36	2.96	2.29	3.46	2.23	3.96	2.17	4.46
SL 5003	65 (2.5")	800	2.37	1.00	2.02	1.60	1.75	2.10	1.63	2.60	1.43	3.20	1.23	4.02
		1000	3.18	1.30	2.83	2.00	2.56	2.60	2.43	3.30	2.13	4.00	1.95	4.60	1.75	5.50
		1200	3.98	1.50	3.63	2.40	3.36	3.20	3.13	4.00	2.93	4.80	2.75	5.60	2.59	6.40
		1400	4.78	1.80	4.43	2.70	4.16	3.70	3.94	4.60	3.74	5.60	3.56	6.50	3.39	7.40	3.24	8.40
		1600	5.59	2.10	5.24	3.00	5.17	4.20	4.94	5.30	4.68	6.40	4.56	7.40	4.29	8.50	4.14	9.60
		1800	6.39	2.30	6.04	3.50	5.87	4.70	5.75	5.90	5.45	7.10	5.17	8.50	5.09	9.60	4.98	10.80
		2000	7.20	2.60	6.85	3.90	6.66	5.30	6.54	6.60	6.35	7.90	6.06	9.60	5.80	10.60	5.65	12.00
		2200	8.00	2.80	7.65	4.30	7.38	5.80	7.16	7.30	6.96	8.70	6.78	10.60	6.61	11.70	6.45	13.20

 

model	Exhaust port Dia (MM)	Speed	Different pressure for different Intake air volume (M^3/min) & shaft power (kw)
			0.1kgf/cm^2		0.2kgf/cm^2		0.3kgf/cm^2		0.4kgf/cm^2		0.5kgf/cm^2		0.6kgf/cm^2		0.7kgf/cm^2		0.8kgf/cm^2
		RPM	1000mmH20		2000mmH20		3000mmH20		4000mmH20		5000mmH20		6000mmH20		7000mmH20		8000mmH20
			0.01Mpa		0.02Mpa		0.03Mpa		0.04Mpa		0.05Mpa		0.06Mpa		0.07Mpa		0.08Mpa
			M^3/min	KW	M^3/min	kW	M^3/min	KW	M^3/min	KW	M^3/min	KW	M^3/min	KW	M^3/min	KW	M^3/min	KW
SL 5006	100 (4")	800	3.84	1.30	3.35	2.20	2.97	3.00	2.66	3.80	2.38	4.70	2.12	5.50
		1000	5.34	1.70	4.98	2.70	4.78	3.80	4.66	4.80	4.53	5.90	4.38	6.90	3.97	7.90
		1200	6.36	2.00	6.25	3.30	6.01	4.50	5.88	5.80	5.46	7.00	4.98	8.88	4.65	9.50
		1400	7.88	2.30	7.78	3.80	7.56	5.30	7.46	6.70	7.23	8.20	6.90	9.70	6.56	11.10	6.34	12.60
		1600	9.70	2.70	9.55	4.30	9.37	6.00	9.12	7.70	8.76	9.40	8.21	11.00	8.05	12.70	7.88	14.40
		1800	11.13	3.00	11.00	4.90	10.67	6.80	10.23	8.70	9.88	10.50	9.50	12.40	9.18	14.30	8.89	16.20
		2000	12.39	3.30	12.22	5.40	11.78	7.50	11.56	10.20	11.34	11.70	11.11	13.80	10.89	15.90	10.22	18.00
		2200	13.64	3.70	13.15	6.00	12.78	8.30	12.46	10.60	12.18	12.90	11.93	15.20	11.69	17.50	11.48	19.80
SL 5009	100 (4")	800	5.83	1.70	5.20	2.90	4.72	4.20	4.32	5.40	3.96	6.00
		1000	7.98	2.10	7.67	3.70	7.32	5.20	7.04	6.70	6.80	8.30
		1200	9.50	2.60	8.87	4.40	8.39	6.20	7.99	8.10	7.63	9.90
		1400	11.33	3.00	10.71	5.10	10.23	7.30	9.82	9.40	9.47	11.60
		1600	13.17	3.40	12.54	5.90	12.03	8.30	11.66	10.80	11.30	13.20
		1800	15.00	3.90	14.38	6.60	13.90	9.40	13.49	12.10	13.14	14.90
		2000	16.84	4.30	16.21	7.40	15.73	10.40	15.33	13.50	14.97	16.50
		2200	18.67	4.70	18.05	8.10	17.57	11.50	17.16	14.80	16.81	18.20

 

model	Exhaust  port dia (MM)	Speed	Different pressure for different Inlet air flow (M^3/min) & shaft power (kw)
			0.1kgf/cm^2		0.2kgf/cm^2		0.3kgf/cm^2		0.4kgf/cm^2		0.5kgf/cm^2		0.6kgf/cm^2		0.7kgf/cm^2		0.8kgf/cm^2
		RPM	1000mmH20		2000mmH20		3000mmH20		4000mmH20		5000mmH20		6000mmH20		7000mmH20		8000mmH20
			0.01Mpa		0.02Mpa		0.03Mpa		0.04Mpa		0.05Mpa		0.06Mpa		0.07Mpa		0.08Mpa
			M^3/min	KW	M^3/min	kW	M^3/min	KW	M^3/min	KW	M^3/min	KW	M^3/min	KW	M^3/min	KW	M^3/min	KW
SL 6005	80 (3")	800	4.63	1.70	4.07	2.70	3.65	3.60	3.29	4.60	2.97	5.60	2.68	6.60	2.42	7.60
		1000	6.13	2.10	5.57	3.30	5.14	4.60	4.78	5.80	4.46	7.10	4.17	8.30	3.91	9.50	3.66	10.80
		1200	7.62	2.50	7.07	4.00	6.64	5.50	6.28	7.00	5.96	8.50	5.67	10.00	5.76	11.50	5.00	12.90
		1400	9.12	2.90	8.56	4.60	8.13	6.40	7.77	8.10	7.45	9.90	7.17	11.60	6.90	13.40	6.65	15.10
		1600	10.61	3.30	10.06	5.30	9.63	7.30	9.27	9.30	8.95	11.30	8.66	13.30	8.40	15.30	8.15	17.30
		1800	12.11	3.70	11.55	6.00	11.12	8.20	10.76	10.50	10.44	12.70	10.16	14.90	9.89	17.20	9.64	19.40
		2000	13.60	4.10	13.05	6.60	12.62	9.10	12.26	11.60	11.94	14.10	11.65	16.60	11.39	19.10	11.14	21.60
SL 6008	125 (5")	800	7.41	2.30	6.51	3.80	5.83	5.40	5.25	7.00	4.74	8.60	4.28	10.20	3.86	11.80
		1000	10.45	2.80	9.88	4.80	9.46	6.80	9.12	8.80	8.53	10.80	8.21	12.80	7.88	14.80	7.12	16.70
		1200	12.98	3.40	12.29	5.80	11.61	8.20	11.12	10.50	10.52	12.90	10.21	15.30	9.64	17.70	9.25	20.10
		1400	15.58	3.90	15.12	6.70	14.77	9.50	14.42	12.30	13.91	15.10	13.45	17.90	13.01	20.70	12.64	23.40
		1600	16.97	4.50	16.45	7.70	15.99	10.90	15.43	14.10	14.97	17.20	14.35	20.40	13.67	23.60	13.03	26.80
		1800	19.67	5.10	19.46	8.70	18.99	12.20	18.50	15.80	18.10	19.40	17.78	23.00	17.40	26.60	17.03	30.10
		2000	21.75	5.60	20.85	9.60	20.17	13.60	19.59	17.60	19.08	21.60	18.62	25.50	18.20	29.50	17.81	33.50

 

model	Exhaust port Dia (MM)	Speed	Different pressure for different Inlet air flow (M^3/min) & shaft power (kw)
			0.1kgf/cm^2		0.2kgf/cm^2		0.3kgf/cm^2		0.4kgf/cm^2		0.5kgf/cm^2		0.6kgf/cm^2		0.7kgf/cm^2		0.8kgf/cm^2
		RPM	1000mmH20		2000mmH20		3000mmH20		4000mmH20		5000mmH20		6000mmH20		7000mmH20		8000mmH20
			0.01Mpa		0.02Mpa		0.03Mpa		0.04Mpa		0.05Mpa		0.06Mpa		0.07Mpa		0.08Mpa
			M^3/min	KW	M^3/min	kW	M^3/min	KW	M^3/min	KW	M^3/min	KW	M^3/min	KW	M^3/min	KW	M^3/min	KW
SL 6015	150 (6")	800	14.90	3.60	14.22	6.60	13.94	9.60	12.86	12.60	10.40	14.30
		1000	19.38	4.60	18.71	8.30	17.43	12.00	16.34	15.80	15.20	19.93
		1200	22.87	5.50	21.20	10.00	19.91	14.40	18.83	18.90	17.83	21.40
		1400	27.36	6.40	25.68	11.60	24.40	16.80	23.31	22.10	22.02	25.00
		1600	31.84	7.30	30.17	13.30	28.88	19.30	27.80	25.20	26.21	28.60
		1800	36.33	8.20	34.65	14.90	33.37	21.70	32.28	28.40	30.40	32.20
		2000	40.81	9.10	39.14	16.60	37.85	24.10	36.77	31.50	34.59	35.70
SL 7006	100 (4")	700	6.93	2.10	6.26	3.60	5.75	5.00	5.32	6.40	4.94	7.80	4.59	9.30	4.27	10.70	4.24	10.90
		800	8.15	2.50	7.48	4.10	6.97	5.70	6.54	7.30	6.16	9.00	5.81	10.60	5.50	12.20	5.20	13.80
		1000	10.59	3.10	9.92	5.10	9.41	7.10	8.98	9.20	8.60	11.20	8.25	13.20	7.94	15.30	7.64	17.30
		1200	13.03	3.70	12.36	6.10	11.85	8.60	11.42	11.00	11.04	13.40	10.69	15.90	10.38	18.30	10.08	20.80
		1400	15.47	4.30	14.81	7.10	14.29	10.00	13.86	12.80	13.48	15.70	13.13	18.50	12.82	21.40	12.52	24.20
		1600	17.91	4.90	17.25	8.20	16.73	11.40	16.30	14.70	15.92	17.90	15.58	21.20	15.26	24.40	14.96	27.70

 

model	Exhaust port Dia (MM)	Speed	Different pressure for different Inlet air flow (M^3/min) & shaft power (kw)
			0.1kgf/cm^2		0.2kgf/cm^2		0.3kgf/cm^2		0.4kgf/cm^2		0.5kgf/cm^2		0.6kgf/cm^2		0.7kgf/cm^2		0.8kgf/cm^2
		RPM	1000mmH20		2000mmH20		3000mmH20		4000mmH20		5000mmH20		6000mmH20		7000mmH20		8000mmH20
			0.01Mpa		0.02Mpa		0.03Mpa		0.04Mpa		0.05Mpa		0.06Mpa		0.07Mpa		0.08Mpa
			M^3/min	KW	M^3/min	kW	M^3/min	KW	M^3/min	KW	M^3/min	KW	M^3/min	KW	M^3/min	KW	M^3/min	KW
SL 7011	150 (6")	700	12.99	3.30	11.87	5.90	11.77	8.60	11.45	11.20	10.98	13.80	10.09	16.40	9.56	19.00
		800	16.23	3.80	15.11	6.80	14.78	9.80	14.54	12.80	13.90	15.70	13.33	18.70	12.80	21.70	12.11	24.70
		1000	20.71	4.80	19.59	8.50	18.74	12.20	18.02	16.00	17.38	19.70	16.81	23.40	16.28	27.10	14.79	30.90
		1200	24.88	5.70	24.11	10.00	23.25	14.50	22.52	19.00	21.88	23.40	21.31	27.90	20.78	32.40	19.28	36.90
		1400	29.72	6.50	28.59	11.70	27.73	16.90	27.00	22.10	26.36	27.40	25.79	32.60	25.26	37.80	24.76	43.00
		1600	33.20	7.40	32.07	13.40	31.21	19.30	30.48	25.30	29.84	31.30	29.27	37.20	28.74	43.20	28.24	49.20
SL 7018	200 (8")	700	21.55	4.80	19.79	9.10	18.45	13.40	17.33	17.60	16.30	18.50
		800	26.22	5.50	25.46	10.40	24.12	15.30	23.56	20.20	22.70	26.50
		1000	32.54	6.90	30.79	13.00	29.45	19.10	28.32	25.20	27.60	30.34
		1200	39.87	8.30	38.12	15.60	36.77	22.90	35.65	30.20	34.90	35.60
		1400	47.20	9.70	45.44	18.20	44.10	26.70	42.98	35.30	40.00	39.45
		1600	54.53	11.00	52.77	20.80	51.43	30.60	50.30	40.30	48.65	44.20

 

model	Exhaust port Dia (MM)	Speed	Different pressure for different Inlet air flow (M^3/min) & shaft power (kw)
			0.1kgf/cm^2		0.2kgf/cm^2		0.3kgf/cm^2		0.4kgf/cm^2		0.5kgf/cm^2		0.6kgf/cm^2		0.7kgf/cm^2		0.8kgf/cm^2
		RPM	1000mmH20		2000mmH20		3000mmH20		4000mmH20		5000mmH20		6000mmH20		7000mmH20		8000mmH20
			0.01Mpa		0.02Mpa		0.03Mpa		0.04Mpa		0.05Mpa		0.06Mpa		0.07Mpa		0.08Mpa
			M^3/min	KW	M^3/min	kW	M^3/min	KW	M^3/min	KW	M^3/min	KW	M^3/min	KW	M^3/min	KW	M^3/min	KW
SL 8016	200 (8")	700	20.38	7.05	18.18	10.56	16.54	14.36	15.11	17.37	13.90	21.58	12.80	25.78
		850	25.87	8.56	23.67	13.38	22.02	17.44	20.60	21.10	19.39	26.20	18.29	31.30
		1000	31.35	10.08	29.16	15.09	27.51	20.52	26.09	24.82	24.88	30.82	23.78	36.82	22.72	42.83	21.80	48.83
		1150	36.84	11.59	34.65	17.35	33.00	23.59	31.57	28.54	30.37	35.45	29.27	42.35	28.21	49.25	27.29	56.15
		1250	40.50	12.60	38.30	18.86	36.66	25.65	35.23	31.02	34.02	38.53	32.93	46.03	31.87	53.53	30.95	61.04
		1400	45.99	14.11	43.79	21.12	42.15	28.72	40.72	34.75	39.51	43.15	38.41	51.55	37.35	59.96	36.44	68.36
		1500	49.65	15.11	47.45	22.63	45.80	30.78	44.38	37.23	43.17	46.23	42.07	55.24	41.01	64.24	40.10	73.24
SL 8024	250 (10")	700	30.85	9.34	27.73	14.94	25.32	20.92	23.29	25.74	21.54	32.04	19.95	38.33
		850	39.07	11.34	35.95	18.14	33.54	25.41	31.51	31.26	29.76	38.90	28.17	46.54
		1000	47.29	13.34	44.17	21.34	41.76	29.89	39.73	36.77	37.98	45.77	36.39	54.76
		1150	55.51	15.34	52.39	24.54	49.98	34.37	47.95	42.29	46.20	52.63	44.61	62.97
		1250	60.99	16.67	57.87	26.67	55.46	37.36	53.43	45.97	51.68	57.21	50.09	68.45
		1400	69.21	18.67	66.09	29.87	63.68	41.85	61.65	51.48	59.90	64.27	58.31	76.66
		1500	74.69	20.01	71.57	32.00	69.16	44.84	67.13	55.16	65.38	68.65	63.79	82.14

 

model	Exhaust port  Dia (MM)	Speed	Different pressure for different Inlet air flow (M^3/min) & shaft power (kw)
			0.1kgf/cm^2		0.2kgf/cm^2		0.3kgf/cm^2		0.4kgf/cm^2		0.5kgf/cm^2		0.6kgf/cm^2		0.7kgf/cm^2		0.8kgf/cm^2
		RPM	1000mmH20		2000mmH20		3000mmH20		4000mmH20		5000mmH20		6000mmH20		7000mmH20		8000mmH20
			0.01Mpa		0.02Mpa		0.03Mpa		0.04Mpa		0.05Mpa		0.06Mpa		0.07Mpa		0.08Mpa
			M^3/min	KW	M^3/min	kW	M^3/min	KW	M^3/min	KW	M^3/min	KW	M^3/min	KW	M^3/min	KW	M^3/min	KW
SL 9020	250 (10")	700	34.83	10.06	31.68	16.32	29.26	23.00	27.20	28.40	25.44	35.35	23.81	42.31
		850	43.92	12.22	40.77	19.82	38.35	27.93	36.29	34.48	34.53	42.93	32.89	51.38
		1000	53.01	14.37	49.86	23.32	47.43	32.86	45.37	40.57	43.62	50.50	41.98	60.44	40.47	70.38	39.13	80.32
		1150	62.09	16.53	58.94	26.82	56.52	37.79	54.46	46.65	52.70	58.08	51.07	69.51	49.55	80.94	48.22	92.37
		1250	68.15	17.96	65.00	29.15	62.58	41.08	60.52	50.71	58.76	63.13	57.13	75.55	55.61	87.98	54.28	100.40
		1400	77.24	20.12	74.09	32.64	71.66	46.01	69.60	56.79	67.85	70.71	66.21	84.62	64.70	98.54	63.36	112.45
		1500	83.30	21.56	80.15	34.98	77.72	49.30	75.66	60.85	73.91	75.76	72.27	90.67	70.76	105.57	69.42	120.48
SL 9030	300 (12")	700	52.65	13.82	48.12	23.54	44.68	33.83	41.78	42.20	39.24	52.61	36.97	63.01
		850	66.25	16.79	61.71	28.58	58.27	41.08	55.37	51.24	52.83	63.88	50.57	76.52
		1000	79.84	19.75	75.31	33.62	71.86	48.32	68.96	60.28	66.43	75.15	64.16	90.02
		1150	93.43	22.71	88.90	38.67	85.46	55.57	82.56	69.33	80.02	86.43	77.75	103.52
		1250	102.49	25.67	97.96	43.71	94.52	62.82	91.62	78.37	89.08	97.70	86.82	117.03
		1400	116.09	27.65	111.56	47.07	108.11	67.65	105.21	84.40	102.68	105.21	100.41	126.03
		1500	125.15	29.62	120.62	50.44	117.18	72.49	114.28	90.43	111.74	112.73	109.47	135.03

 

model	Exhaust port  Dia (MM)	Speed	Different pressure for different Inlet air flow  (M^3/min) & shaft power (kw)
			0.1kgf/cm^2		0.2kgf/cm^2		0.3kgf/cm^2		0.4kgf/cm^2		0.5kgf/cm^2		0.6kgf/cm^2		0.7kgf/cm^2		0.8kgf/cm^2
		RPM	1000mmH20		2000mmH20		3000mmH20		4000mmH20		5000mmH20		6000mmH20		7000mmH20		8000mmH20
			0.01Mpa		0.02Mpa		0.03Mpa		0.04Mpa		0.05Mpa		0.06Mpa		0.07Mpa		0.08Mpa
			M^3/min	KW	M^3/min	kW	M^3/min	KW	M^3/min	KW	M^3/min	KW	M^3/min	KW	M^3/min	KW	M^3/min	KW
SL 10027	300 (12")	800	74.04	17.21	69.22	29.60	65.60	42.71	62.59	53.39	59.88	66.58	57.57	79.77
		900	79.06	19.36	74.24	33.30	70.63	48.05	67.61	60.07	64.90	74.90	62.59	89.74
		1000	89.11	21.51	84.29	37.00	80.67	53.39	77.66	66.74	74.95	83.23	72.64	99.71	70.32	116.19	68.32	132.68
		1100	99.16	23.66	94.34	40.70	90.72	58.73	87.70	73.42	84.99	91.55	82.68	109.68	80.37	127.81	78.36	145.94
		1250	114.23	26.89	109.41	46.25	105.79	66.74	102.77	83.43	100.06	104.03	97.75	124.64	95.44	145.24	93.43	165.85
		1400	129.30	30.11	124.47	51.80	120.86	74.74	117.84	93.44	115.13	116.52	112.82	139.59	110.51	162.67	108.50	185.75
SL 10034	350 (14")	800	94.08	20.95	88.39	36.78	84.08	53.48	80.41	67.13	77.24	83.75	74.33	100.37
		900	100.42	23.57	94.72	41.38	90.41	60.17	86.74	75.52	83.57	94.22	80.66	112.92
		1000	113.08	26.19	107.38	45.98	103.07	66.85	99.40	83.91	96.24	104.69	93.32	125.47
		1100	125.74	30.12	120.04	52.87	115.74	76.88	112.06	96.50	108.90	120.39	105.99	144.28
		1250	144.73	34.05	139.04	59.77	134.73	86.91	131.06	109.09	127.89	136.10	124.98	163.10
		1400	163.73	36.67	158.03	64.37	153.72	93.59	150.05	117.48	146.89	146.56	143.97	175.65

Blower Main Parts Materials

Casing	Cast iron HT 200
Rotor (Impeller &shaft)	QT 500-
Gear	20CrMnTi
Bearing	Japanese NSK
Oil seal	USA CR
Oil tank	Double Oil Tanks, Clean Site

Impeller CNC machining center

Working shop
 


Application pictures

*** After running more than 1 year , there are very clean on site , no oil leakage

Packing & delivery
Our wooden case is with fumigation sign, It is Moisture-proof